Chamberlain RGAIPI Uživatelský manuál stáhnout pdf

Carton Inventory

Overview

The Wireless Gate Access Intercom allows

homeowners to communicate with guests at the gate

and operate the gate from inside the house. The

Indoor Intercom emits a doorbell sound and

establishes a secure 900 Mhz digital radio link with

the Outdoor Intercom. The Wireless Gate Access

Intercom is compatible with various Chamberlain

Wireless Products and all Chamberlain Gate

Operators.

Indoor Intercom

Rubber Pads

Operation & Features

Talk Button: Following the ringing

of the doorbell by a guest, press

and hold the Talk button to talk to

the guest. Once the link to the

Outdoor Intercom is made, any

other intercoms in the network

cannot hear the conversation.

Select Button: During a conversation, the Select

button can be pressed to open the gate. A beep will

be heard and the gate will open. To open the gate

when not in a conversation, press and hold the Select

Button for 10 seconds.

Volume: Pressing the Volume

button repeatedly will cycle through

volume levels.

Battery: The AA Alkaline batteries

(not provided) will last up to a year

depending on use (Lithium batteries

recommended for colder

environments). When batteries are

low intercom will emit two beeps

every ten minutes.

An AC Adapter (not provided) can

also be used to power the

intercom. In this case, both the

power and channel lights will

remain on.

Volume Button

Talk

(Power - On)

Select Button

Learn Button

Dipswitch #1

Dipswitch #2

AC Adapter

Model RGAIPI

Wireless Gate Access Intercom

OPTIONAL

Mounting Tape

Alcohol Wipe

Outdoor Intercom

Indoor Intercom

On/Off: To turn Indoor Intercom ON, press any

button. To turn Indoor Intercom OFF, hold down the

Volume button for 5 seconds.

Call Button

Speaker

Learn Button

Dipswitch

Block

Outdoor Intercom

Call Button: To communicate with the Indoor

Intercom, press and release the Call button. A

doorbell sound will be heard on the Indoor Intercom.

Once a secure link is made, the Call button on the

Outdoor Intercom does not need to be pressed to

speak again.

Battery: The AA Alkaline batteries (not provided) will

last up to a year depending on use. (Lithium batteries

recommended for colder environments.)

Volume: To increase the Outdoor Intercom volume,

set Dipswitch #4 to OFF.

Sensitivity: To increase sensitivity on

the Outdoor Intercom set Dipswitch #3

to OFF.

NOTE: Dipswitch #1 must always

remain ON. Dipswitch #2 is not used.

1 2 3 4 5 6

Shrnutí obsahu

Strany 1 - Model RGAIPI

Carton InventoryOverviewThe Wireless Gate Access Intercom allows homeowners to communicate with guests at the gate and operate the gate from inside th

Strany 2 - Gate Operator

2AssembleStep 2: Adhere rubber pads to bottom.Repeat Steps 1 and 2 for any additional intercoms.Outdoor IntercomProgram Indoor Intercom to Outdoor Int

Strany 3 - Mount Outdoor Intercom

3Step 1Peel paper from mounting tape. Firmly press Outdoor Intercom onto mounting surface.Clean back of Outdoor Intercom and mounting surface using th

Strany 4 - Program Additional Intercoms

4TroubleshootingIndoor Intercom does not receive voice transmission from Outdoor Intercom.Check the batteries in both intercoms. Ensure the Indoor Int

Strany 5 - Mounting Template

51 3/8"4 1/4"2"Mounting Template

Strany 6 - 1-800-528-9131

Komentáře k této Příručce

Žádné komentáře

Chamberlain RGAIPI Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Systémy intercom pro domy Chamberlain RGAIPI. Chamberlain RGAIPI User's Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Systémy intercom pro domy Chamberlain RGAIPI